Cisco Nexus 7000 Series Command Reference Manual page 165

L Commands
logging tunnel
To configure the tunnel specific traps logging, use the logging tunnel command. To return to the default
setting, use the no form of this command.
Syntax Description
lsp-selection
path change
prefix-list
Command Modes TE configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to specify the log tunnel LSP selection traps.
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging tunnel lsp-selection prefix-list1
switch(config-te)#
Related Commands Command
mpls traffic-eng
configuration
OL-24994-01
logging tunnel {lsp-selection | path change} [prefix-list]
no logging tunnel {lsp-selection | path change}
Specifies the log tunnel LSP selection traps.
Specifies the log tunnel LSP path change traps.
(Optional) Prefix list.
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
logging tunnel
1125