Cisco Nexus 7000 Series Command Reference Manual page 230

path-selection overload allow
path-selection overload allow
To allow overloaded nodes in Constrained Shortest Path First (CSPF), use the path-selection overload
allow command. To return to the default setting, use the no form of this command.
Syntax Description
head
middle
tail
Defaults None
Command Modes
TE configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to specify that an overloaded node can still be used as a tunnel head in the traffic
engineering (TE) constrained Shortest Path First (CSPF):
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# path-selection overload allow head
switch(config-te)#
Related Commandss Command
mpls traffic-eng
configuration
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1182
path-selection overload allow {head [middle [tail]] | middle [tail] | tail}
no path-selection overload allow
Specifies that an overloaded node can still be used as a tunnel head in the traffic
engineering (TE) constrained Shortest Path First (CSPF).
(Optional) Specifies the overloaded middle node in the TE CSPF.
(Optional) Specifies the overloaded tail node in the TE CSPF.
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
P Commands
OL-24994-01