Cisco Nexus 7000 Series Command Reference Manual page 146
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
l2vpn vfi context
l2vpn vfi context
To establish a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate
networks, use the l2vpn vfi context command. To delete the VFI and the associated configuration, use the
no form of this command.
Syntax Description
context-name
Defaults
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to establish an L2VPN VFI between two or more separate networks:
switch# configure terminal
switch(config)# l2vpn vfi context vpls80
switch(config-l2vpn-vfi)#
This example shows how to delete the VFI and the associated configuration:
switch(config-l2vpn-vfi)# no l2vpn vfi context vpls80
Related Commands
Command
member pseudowire
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1106
l2vpn vfi context context-name
no l2vpn vfi context context-name
VFI context name. The range is from 0 to 65535.
Modification
This command was introduced.
Description
Binds a static pseudowire to this VFI.
L Commands
OL-24994-01
Advertisement
Table of Contents
