Cisco Nexus 7000 Series Command Reference Manual page 340

show ip rsvp signalling rate-limit
show ip rsvp signalling rate-limit
To display the Resource Reservation Protocol (RSVP) globally configured signalling rate limit
information, use the show ip rsvp signalling rate-limit command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the RSVP signalling rate limit parameters:
switch# show ip rsvp signalling rate-limit
Rate-Limiting: Disabled
Limit: 100
Interval (msec): 1000
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1262
show ip rsvp signalling rate-limit
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01