Cisco Nexus 7000 Series Command Reference Manual page 237
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
P Commands
port-profile type pseudowire
To enter interface port profile configuration mode and configure a pseudowire port profile, use the
port-profile type pseudowire command.
Syntax Description
profile-name
Defaults
None
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to specify an address to exclude while configuring an explicit path:
switch# configure terminal
switch(config)# port-profile type pseudowire AToM
switch(config-if-prof)#
Related Commands
Command
encapsulation mpls
interface pseudowire
state enabled
OL-24994-01
port-profile type pseudowire profile-name
Name of the profile. The string can be any alphanumeric string up to 80
characters.
Modification
This command was introduced.
Description
Specifies MPLS encapsulation for this profile.
Enters interface pseudowire configuration mode and configures a static
pseudowire logical interface.
Enables the interface port profile.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
port-profile type pseudowire
1189
Advertisement
Table of Contents
