Cisco Nexus 7000 Series Command Reference Manual page 383
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show mpls switching labels
To display label-related information, use the show mpls switching label command.
Syntax Description
label1
label 2
detail
vrf
vrf name
Defaults
None
Command Modes
EXEC
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display the label-related information for the VRF instance:
swtch# show mpls switching labels vrf vrf1
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
switch#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show mpls switching labels [label 1 label 2] detail vrf vrf name vrf vrf name}
Low label value. The range is from 0 to 524286.
High label value. The range is from 0 to 524286.
Specifies the detailed information.
Displays the virtual routing and forwarding (VRF) instance.
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls switching labels
1305
Advertisement
Table of Contents
