Fast-Reroute Timers Promotion - Cisco Nexus 7000 Series Command Reference Manual

F Commands

fast-reroute timers promotion

To specify how often the router considers switched a label switching path (LSP) to a new (better) backup
tunnel if additional backup bandwidth becomes available, use the fast-reroute timers promotion
command. To restore the system to its default condition, use the no form of this command.
Syntax Description
sec
Defaults
The timer is running and is set to a frequency of every 300 seconds (5 minutes)
Command Modes
TE configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure how often to scan for LSP backup promotion:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# fast-reroute timer promotion 10
switch(config-te)#
Related Commands Command
mpls traffic-eng
configuration
OL-24994-01
fast-reroute timers promotion sec
no fast-reroute timers promotion
(Optional) Sets the interval, in seconds, between scans to determine if an
LSP should use a new, better backup tunnel. Valid values are from 0 to
604800. A value of 0 disables promotions to a better LSP.
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
protocol (MPLS-TE).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
fast-reroute timers promotion
153