Ip Rsvp Signalling Dscp - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ip rsvp signalling dscp

To set a Differentiated Services Code Point (DSCP) for Resource Reservation Protocol (RSVP)
signalling messages, use the ip rsvp signalling dscp command. To revert to the default settings, use the
no form of this command.
Syntax Description
value
Defaults
48.
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to set the DSCP for RSVP signalling messages:
switch# configure terminal
switch(config)# interface ethernet 6/1
switch(config-if)# ip rsvp signalling dscp 1
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
ip rsvp signalling dscp value
no ip rsvp signalling dscp value
DSCP value. The range is from 0 to 63.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
ip rsvp signalling dscp
193