Cisco Nexus 7000 Series Command Reference Manual page 157

L Commands
logging events frr-protection all
To configure the generation of system logs when an FRR event occurs, use the logging events
frr-protection all command. To stop logging these system messages, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
Examples The following example shows how to configure generation of system messages when an FRR event
occurs:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging events frr-protection all
switch(config-te)#
OL-24994-01
logging events frr-protection all
no logging events frr-protection all
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
logging events frr-protection all
1117