Backoff - Cisco Nexus 7000 Series Command Reference Manual

backoff

backoff
To configure session setup delay parameters for the Label Distribution Protocol (LDP) backoff
mechanism, use the backoff command. To return to the default setting, use the no form of this command.
Syntax Description
initial-backoff
max-backoff
Defaults None
Command Modes
LDP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to setup delay parameters for the LDP backoff mechanism:
switch(config)# mpls ldp configuration
switch(config-ldp)# backoff 30 240
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
112
backoff initial-backoff max-backoff
no backoff
Initial backoff value in seconds. The range is from 5 to 2147483.
Maximum backoff value in seconds. The range is from 5 to 2147483.
Modification
This command was introduced.
Description
Protocol (LDP).
B Commands
OL-24994-01