Cisco Nexus 7000 Series Command Reference Manual page 192

mpls ip (TE configuration mode)
mpls ip (TE configuration mode)
To enable the LDP over an MPLS TE tunnel, use the mpls ip command.
Syntax Description
This command has no arguments and keywords.
Defaults
None
Command Modes TE configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the IP TTl propagation over MPLS:
switch# config t
Enter configuration commands, one per line.
switch(config)# interface tunnel-te
switch(config-te)# mpls ip
switch(config-te)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1144
mpls ip
Modification
This command was introduced.
Description
Protocol (LDP).
End with CNTL/Z.
M Commands
OL-24994-01