Bandwidth (Te Interface Configuration Mode) - Cisco Nexus 7000 Series Command Reference Manual

bandwidth (TE interface configuration mode)

bandwidth (TE interface configuration mode)
To configure the bandwidth for a Multiprotocol Label Switching (MPLS) traffic engineering (TE)
tunnel, use the bandwidth command. To restore the system to its default condition, use the no form of
this command.
Syntax Description
bandwidth
Defaults
0
Command Modes TE interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the bandwidth for a MPLS TE tunnel:
switch# configure terminal
switch(config)# interface tunnel-te 1
switch(config-if-te)# bandwidth 250
switch(config-if-te)#
Related Commands Command
interface tunnel-te
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
116
bandwidth bandwidth
no bandwidth
Bandwidth in kilobits per second. The range is from 1 to 4294967295.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
B Commands
OL-24994-01