Cisco Nexus 7000 Series Command Reference Manual page 341

Show Commands
show ip rsvp signalling refresh
To display the Resource Reservation Protocol (RSVP) signalling refresh information, use the show ip
rsvp signalling refresh command.
Syntax Description interval
misses
reduction
Defaults None
Command Modes EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the RSVP globally configured refresh interval information:
switch# show ip rsvp signalling refresh interval
Refresh interval (sec): 45
switch#
This example shows how to display the RSVP globally configured refresh misses information:
switch# show ip rsvp signalling refresh misses
Refresh misses: 4
switch#
This example shows how to display the RSVP globally configured refresh reduction information:
switch# show ip rsvp signalling refresh reduction
Refresh Reduction: Disabled
ACK delay (msec): 400
Initial retransmit delay (msec): 5000
Local epoch: 0x74b530
Message IDs: in use 0, total allocated 0, freed 0
switch#
OL-24994-01
show ip rsvp signalling refresh {interval | misses | reduction}
Specifies the interval for refresh messages.
Specifies the misses required to trigger a state timeout.
Specifies the refresh reduction parameters.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip rsvp signalling refresh
1263