Control-Word - Cisco Nexus 7000 Series Command Reference Manual

C Commands

control-word

To enable the control word support, use the control-word command.
Syntax Description
exclude
include
Defaults None
Command Modes config-if-pseudowire mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines A device can receive a packet with or without the control word and the control word capability is
negotiated with the peer. However, the device cannot generate a sequence number in the control word if
the control word is added to the ingress device.
This command requires the MPLS Services license.
Examples This example shows how to enable the control word support:
switch# configure terminal
switch(config)# interface pseudowire 12
switch(config-if-pseudowire)# control-word include
switch(config-if-pseudowire)#
Related Commands Command
interface pseudowire
OL-24994-01
control-word {exclude | include}
Specifies to exclude the control word in the pseudowire packet.
Specifies to include the control word in the pseudowire packet.
Modification
This command was introduced.
Description
Enters interface pseudowire configuration mode and configures a static
pseudowire logical interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
control-word
127