Cisco Nexus 7000 Series Command Reference Manual page 361

Show Commands
show mpls ldp discovery
To display the status of the Label Distribution Protocol (LDP) discovery process including the transport
address, use the show mpls ldp discovery detail command.
Syntax Description detail
Defaults
None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the status of the LDP discovery process including the transport address:
switch# show mpls ldp discovery
Local LDP Identifier:
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show mpls ldp discovery [detail]
(Optional) Displays the detailed LDP discovery information.
Modification
This command was introduced.
10.0.0.30:0
Discovery Sources:
Interfaces:
Ethernet2/2 (ldp): xmit
Enabled: Interface config
Hello interval: 333 ms; Transport IP addr: 10.0.0.30
Clients: IPv4
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls ldp discovery
1283