Cisco Nexus 7000 Series Command Reference Manual page 183

M Commands
mdt pim jp-interval
To configure the PIM periodic interval associated with join or prune packet transmission over the
default multicast distribution tree (MDT) tunnel interface, use the mdt pim jp-interval command. To
return to the default settings, use the no form of the command.
Syntax Description interval
Defaults
60000 milliseconds
Command Modes Configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the PIM periodic interval associated join packet transmission
over the default MDT tunnel interface:
switch# config t
Enter configuration commands, one per line.
switch(config)# vrf context vrf1
switch(config-vrf)# mdt pim jp-interval 60000
switch(config-vrf)#
Related Commands Command
show mvpn mdt route
OL-24994-01
mdt pim jp-interval interval
no mdt pim jp-interval interval
Interval in seconds. The range is from 60000 to 18724286.
Modification
This command was introduced.
Description
Displays the detail of the default and the MDT route.
End with CNTL/Z.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mdt pim jp-interval
1135