Cisco Nexus 7000 Series Command Reference Manual page 311

Show Commands
show ip ospf
To display information about Open Shortest Path First (OSPF), use the show ip ospf command.
Syntax Description
instance-tag
vrf
vrf-name
Defaults None
Command Modes EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display information about OSPF:
switch(config)# show ip ospf test1 vrf vpn1
Routing Process test1 with ID 0.0.0.0 VRF vpn1
Stateful High Availability enabled
Graceful-restart is configured
Grace period: 60 state: Inactive
Last graceful restart exit status: None
Supports only single TOS(TOS0) routes
Supports opaque LSA
Administrative distance 110
Reference Bandwidth is 40000 Mbps
SPF throttling delay time of 200.000 msecs,
SPF throttling hold time of 1000.000 msecs,
SPF throttling maximum wait time of 5000.000 msecs
LSA throttling start time of 0.000 msecs,
LSA throttling hold interval of 5000.000 msecs,
LSA throttling maximum wait time of 5000.000 msecs
Minimum LSA arrival 1000.000 msec
LSA group pacing timer 10 secs
Maximum paths to destination 8
OL-24994-01
show ip ospf instance-tag vrf vrf-name
Instance tag that is a case-sensitive, alphanumeric string up to 20 characters.
Displays the virtual routing and forwarding (VRF) instance.
VRF name that is any case-sensitive, alphanumeric string up to 32
characters.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip ospf
1233