Cisco Nexus 7000 Series Command Reference Manual page 161

L Commands
logging lsp
To log label switched path (LSP) traps, use the logging lsp command. To return to the default setting, use
the no form of this command.
Syntax Description
path-errors
preemption
reservation-errors
setups
teardowns
prefix-list
Command Modes TE configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to log LSP path error traps:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging lsp path-errors prefix-list1
switch(config-te)#
Related Commands Command
mpls traffic-eng
configuration
OL-24994-01
logging lsp {path-errors | preemption | reservation-errors | setups | teardowns} [prefix-list]
no logging lsp {path-errors | preemption | reservation-errors | setups | teardowns}
Specifies to log LSP path error traps.
Specifies to log LSP preemption traps.
Specifies to log LSP reservation error traps.
Specifies to log LSP establishment traps.
Specifies to log LSP teardown traps.
(Optional) Prefix list.
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
logging lsp
1121