Cisco Nexus 7000 Series Command Reference Manual page 263

R Commands
router bgp
To configure a Border Gateway Protocol (BGP) process for an interface, use the router bgp command.
To return to the default setting, use the no form of this command.
Syntax Description
as-number
Defaults
None
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure a BGP process for an interface:
switch(config)# router bgp 1.1
switch(config-router)#
Related Commands Command
tunnel-te interface
OL-24994-01
router bgp as-number
no router bgp as-number
Number of an autonomous system that identifies the router to other BGP
routers and tags that the routing information passed along. The AS number
can be a 16-bit integer or a 32-bit integer in the form of a higher 16-bit
decimal number and a lower 16-bit decimal number in xx.xx format.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
router bgp
1215