Cisco Nexus 7000 Series Command Reference Manual page 348

show l2vpn vfi
show l2vpn vfi
To display Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) information, use the show l2vpn
vfi command.
Syntax Description name
vpc
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command does not require a license.
Examples This example shows how to display L2VPN VFI information:
switch# show l2vpn vfi vpc
VFI name: vpls-80
Mode: primary
State: VFI Primary
BD Id: 0
switch#
Related Commandss Command
show l2vpn service vfi
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1270
show l2vpn service vfi {name | vpc}
Displays a specific VFI by name.
Displays virtual port channel (vPC) VPLS Redundancy information.
Modification
This command was introduced.
Description
Displays L2VPN VFI service information.
Show Commands
OL-24994-01