Cisco Nexus 7000 Series Command Reference Manual page 366

show mpls ldp parameter
show mpls ldp parameter
To display the current Label Distribution Protocol (LDP) configuration parameters, including the session
hold time, use the show mpls ldp parameter command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the LDP configuration parameter:
switch# config t
Enter configuration commands, one per line.
switch(config)# mpls ldp configuration
switch(config-ldp)# show mpls ldp parameter
LDP Feature Set Manager: State Initialized
LDP features:
Protocol version: 1
Session hold time: 180 sec; keep alive interval: 60 sec
Discovery hello: holdtime: 1 sec; interval: 5 sec
Discovery targeted hello: holdtime: 1 sec; interval: 1 sec
Accepting targeted hellos; peer acl: a
Downstream on Demand max hop count: 255
LDP for targeted sessions
LDP initial/maximum backoff: 15/120 sec
LDP loop detection: off
switch(config-ldp)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1288
show mpls ldp parameter
Modification
This command was introduced.
Basic
IP-over-MPLS
TDP
IGP-Sync
Auto-Configuration
TCP-MD5-Rollover
LLAF
End with CNTL/Z.
Show Commands
OL-24994-01