Autoroute Announce - Cisco Nexus 7000 Series Command Reference Manual

A Commands

autoroute announce

To announce the traffic-engineering tunnel to an Interior Gateway Protocol (IGP), use the autoroute
announce command. To restore the system to its default condition, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes TE interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to announce the tunnel to IGP:
switch# configure terminal
switch(config)# interface tunnel-te 1
switch(config-if-te)# autoroute announce
switch(config-if-te)#
Related Commands Command
interface tunnel-te
OL-24994-02
autoroute announce
no autoroute announce
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
autoroute announce
121