Cisco Nexus 7000 Series Command Reference Manual page 386

show mpls switching traffic-eng tunnels
show mpls switching traffic-eng tunnels
To display the traffic engineering head end information, use the show mpls switching traffic-eng
command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
EXEC
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the traffic engineering head end information:
switch# show mpls switching traffic-eng tunnels
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
Tunnel-Headend
tunnel-te105
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1308
show mpls switching traffic-eng tunnels
Modification
This command was introduced.
Description
Protocol (LDP).
Out-Label Out-Interface
3 Eth2/1
Show Commands
Next-Hop
1.7.0.2
OL-24994-01