Authentication Lifetime - Cisco Nexus 7000 Series Command Reference Manual

authentication lifetime

authentication lifetime
To control how long the Resource Reservation Protocol (RSVP) maintains security associations with a
neighbor, use the authentication lifetime command. To revert to the default lifetime, use the no form
of this command.
Syntax Description
neighbor
address ip-address
hh:mm:ss
Defaults 30 minutes
Command Modes
RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to specify the maximum lifetime of a neighbor authentication state:
switch# configure terminal
switch(config)# ip rsvp
switch(config-ip-rsvp)# authentication neighbor 1.1.1.1 lifetime 60
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
118
authentication [neighbor address ip-address] lifetime hh:mm:ss
no authentication [neighbor address ip-address] lifetime hh:mm:ss
(Optional) Specifies the RSVP neighbor.
(Optional) Specifies the RSVP neighbor address.
Lifetime value in seconds. The range is from 30 to 86400 seconds.
Modification
This command was introduced.
Description
Protocol (LDP).
A Commands
OL-24994-02