Cisco Nexus 7000 Series Command Reference Manual page 352

show mpls interface detail
show mpls interface detail
To display details about the configuration status of the Multiprotocol Label Switching (MPLS) Label
Distribution Protocol (LDP) on the interface, use the show mpls interface detail command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Interface configuration mode
Command Modes
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how display details about the configuration status of MPLS LDP on the interface:
switch# config t
Enter configuration commands, one per line.
switch(config)# show mpls interface detail
Interface Ethernet2/2:
Interface tunnel-te1:
switch(config)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1274
show mpls interface detail
Modification
This command was introduced.
ldp enabled
MPLS operational
Label space id 0x10000001
MPLS sub-layer Ethernet2/2-mpls layer(0x26000002)
mpls te vif enabled
MPLS is not operational
Label space id 0x10000001
MPLS sub-layer tunnel-te1-mpls layer(0x26000001)
Description
Protocol (LDP).
End with CNTL/Z.
Show Commands
OL-24994-01