Cisco Nexus 7000 Series Command Reference Manual page 328

show ip rsvp hello client neighbor
show ip rsvp hello client neighbor
To display the Resource Reservation Protocol (RSVP) hello neighbor information, use the show ip rsvp
hello client neighbor command.
Syntax Description detail
Defaults
None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display RSVP hello neighbor information:
switch(config-if)# show ip rsvp hello client neighbor
Remote
10.10.10.10
10.10.10.14
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1250
show ip rsvp hello client neighbor [detail]
(Optional) Specifies the detailed hello neighbor information.
Modification
This command was introduced.
Type NBR_STATE
GR Normal
GR Normal
Description
Protocol (LDP).
HI_STATE LSPs
Up 1
Up 3
Show Commands
OL-24994-01