Cisco Nexus 7000 Series Command Reference Manual page 143

K Commands
key chain
To configure a group of authentication keys, use the key chain command. To return to the default setting,
use the no form of this command.
Syntax Description
keychain-name
Defaults None
Command Modes Keychain configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure a group of authentication keys:
switch# configure terminal
switch(config)# key chain keychain1
switch(config-keychain)# key 10
switch(config-keychain-key)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
key chain keychain-name
no key chain keychain-name
Key chain name. The maximum size is alphanumeric 32 characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
key chain
1103