Cisco Nexus 7000 Series Command Reference Manual page 275

S Commands
set
To define a mapping of values between two quality of services (QoS) types, use the set command. To
return to the default setting, use the no form of this command.
Syntax Description
to-field
from-field
table
table-map-name
Defaults
None
Command Modes
Class-map configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples The following example shows how to define a mapping of values between two QoS:
switch# configure terminal
switch(config)# policy-map Policy1
switch(config-pmap-qos)# class Class2
switch(config-pmap-c-qos)# set cos mpls-exp-topmost table dscp-cos-mapset
switch(config-pmap-c-qos)# end
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
set to-field from field table table-map-name
no set to-field from field table table-map-name
EXP field on the outer (topmost) label (mpls-exp-topmost).
EXP field to be applied on all imposed labels (mpls-exp-imposition).
Specifies the table that defines the mapping from the input to the output.
Name of a system-defined table map or an existing table map.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
set
1207