Cisco Nexus 7000 Series Command Reference Manual page 244

rd
rd
To create routing and forwarding tables, use the rd command. To return to the default setting, use the no
form of this command.
Syntax Description
route-distinguisher
Defaults None
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to create routing and forwarding tables:
switch# configure terminal
switch(config)# vrf context vpn1
switch(config-vrf)# rd 1.2:1
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1196
rd route-distinguisher
no rd route-distinguisher
8-byte value that is added to an IPv4 prefix to create a VPN IPv4 prefix.
Modification
This command was introduced.
Description
Protocol (LDP).
R Commands
OL-24994-01