Cisco Nexus 7000 Series Command Reference Manual page 329

Show Commands
show ip rsvp hello instance
To display the Resource Reservation Protocol (RSVP) hello instance information, use the show ip rsvp
hello instance command.
Syntax Description detail
Defaults
None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display RSVP hello instance information:
switch(config-if)# show ip rsvp hello instance
Active Instances:
Client
GR
GR
Passive Instances:
- None –
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show ip rsvp hello instance [detail]
(Optional) Specifies the detailed hello instance information.
Modification
This command was introduced.
Neighbor I/F
10.10.10.10 Any
10.10.10.14 Any
Description
Protocol (LDP).
State
Up
Up
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip rsvp hello instance
LostCnt LSPs Interval
0 1 10000
0 3 10000
1251