Cisco Nexus 7000 Series Command Reference Manual page 389

Show Commands
show mpls traffic-eng exp
To display the Multiprotocol Label Switching (MPLS) traffic engineering (TE) tunnel expression
information, use the show mpls traffic-eng exp command.
Syntax Description ipaddr
Defaults
None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
This example shows how to display the Multiprotocol Label Switching (MPLS) traffic engineering (TE)
Examples
tunnel expression information:
switch# show mpls traffic-eng exp 10.1.1.1
Destination: 10.1.1.1
Master: tunnel-te1
Members
tunnel-te2
tunnel-te3
switch#
Related Commands Command
show mpls traffic-eng
autoroute
OL-24994-01
show mpls traffic-eng exp [ipaddr]
(Optional) Destination IP address for the master tunnels.
Modification
This command was introduced.
Status
up (Active)
up (Active)
Description
Displays the autorouted tunnel destination information.
Status: up
Conf Exp
Default
3
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls traffic-eng exp
Actual Exp
Default
3
1311