Cisco Nexus 7000 Series Command Reference Manual page 142

key
key
To configure an authentication key on a keychain, use the key command. To return to the default setting,
use the no form of this command.
Syntax Description
key-id
Defaults None
Command Modes Keychain key configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure an authentication key on a keychain:
switch# configure terminal
switch(config)# key chain keychain1
switch(config-keychain)# key 10
switch(config-keychain-key)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1102
key key-id
no key key-id
Key ID. The range is from 0 to 65535.
Modification
This command was introduced.
Description
Protocol (LDP).
K Commands
OL-24994-01