Cisco Nexus 7000 Series Command Reference Manual page 190
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
member vfi
member vfi
To bind a virtual forwarding interface (VFI) to a bridge domain, use the member vfi command.
Syntax Description
vfi-id
Defaults
None
Command Modes
config-bdomain mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to bind a VFI to this bridge domain:
switch# configure terminal
switch(config)# bridge-domain 100
switch(config-bdomain)# member vfi vpls80
switch(config-bdomain)#
Related Commands
Command
bridge domain
l2vpn vfi context
vpn
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1142
member vfi vfi-id
VFI ID. The VFI ID can be any alphanumeric, case-sensitive up to 100
characters.
Modification
This command was introduced.
Description
Enters bridge-domain configuration mode and configures a bridge domain.
Establishes a Layer 2 VPN (L2VPN) Virtual Forwarding Interface (VFI)
between two or more separate networks.
Configures a Virtual Private Network (VPN) ID on a VFI context.
M Commands
OL-24994-01
Advertisement
Table of Contents
