Ip Rsvp Signalling Hello Reroute - Cisco Nexus 7000 Series Command Reference Manual

I Commands

ip rsvp signalling hello reroute

To configure IP Resource reservation Protocol (RSVP) signalling hello reroute commands, use the ip
rsvp signalling hello reroute command. To revert to the default settings, use the no form of this
command.
Syntax Description
override-graceful
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure IP RSVP signalling hello RSVP reroute commands:
switch# configure terminal
switch(config)# interface ethernet 2/2
switch(config-if)# ip rsvp signalling hello reroute override-graceful
switch(config-if)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
ip rsvp signalling hello reroute [override-graceful]
no ip rsvp signalling hello reroute [override-graceful]
Specifies to ignore the existence of the GR node neighbor for the Hello
State Timer (HST) behavior.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
ip rsvp signalling hello reroute
195