Cisco Nexus 7000 Series Command Reference Manual page 166

logging tunnel state
logging tunnel state
To configure the generation of system logs when a TE tunnel changes operational state, use the logging
tunnel state command. To stop logging these system messages, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE interface configuration (config-te-if)
TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
This feature can be configured either for an individual TE tunnel or all the TE tunnels.
Examples This example shows how to configure tunnel state logging for an individual TE tunnel.
switch# configure terminal
switch(config)# interface tunnel-te
switch(config-te-if)# logging tunnel state
switch(config-te-if)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1126
logging tunnel state
no logging tunnel state
Modification
This command was introduced.
number
L Commands
OL-24994-01