Cisco Nexus 7000 Series Command Reference Manual page 325

Show Commands
show ip rsvp fast-reroute
To display the Resource Reservation Protocol (RSVP) Fast Reroute (FRR) information, use the show ip
rsvp fast-reroute command.
Syntax Description detail
Defaults
None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display RSVP fast reroute information:
switch# config t
switch(config)# interface ethernet 6/1
switch(config-if)# show ip rsvp fast-reroute
Destination
10.10.10.10
Fast-Reroute Summary:
Total Reroutable Paths: 2
dc3rtg-x5(config-if)# show ip rsvp fast-reroute detail
Session type: LSP4
Primary Tunnel: Dest 10.10.10.10, ID 20, Source 10.10.10.15
Backup Tunnel: tunnel-te200 [ifid 0x221000c8]
Merge-Point: 10.10.10.10
Merge-Point in ERO: 2.4.1.1
Hop-Protection: NNhop
FRR-State: Active
Protected Interface: tunnel-te200
Bandwidth-Protect: Enabled
FRR-Bandwidth/Protect-Level: 100/2
Desired-Bit: 0x0
BSelect Priority: 7
OL-24994-01
show ip rsvp fast-reroute [detail]
(Optional) Specifies the detailed fast reroute information.
Modification
This command was introduced.
A - Active R - Ready
TunID Source
20 10.10.10.15
Active: 2, Ready: 0, Unassigned: 0
U - Unassigned
Backup Protected-I/f
tunnel-te200 tunnel-te200
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip rsvp fast-reroute
Hop State
NNhop A
1247