Cisco Nexus 7000 Series Command Reference Manual page 347

Show Commands
show l2vpn service vfi
To display Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) service information, use the show
l2vpn service vfi command.
Syntax Description all
interface
name
peer
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command does not require a license.
Examples
This example shows how to display all the L2VPN VFI service entries:
switch# show l2vpn service vfi all
Legend: St=State
Interface
---------
VPLS name: vpls-80, State: DN
vfi100001
switch#
Related Commandss Command
show l2vpn vfi
OL-24994-01
show l2vpn service vfi {all | interface | name | peer}
(Optional) Displays all VPLS service entries.
(Optional) Displays all services by the member interface.
(Optional) Displays a specific service by its name.
(Optional) Displays all services by the peer IP address.
Modification
This command was introduced.
XC St=State in the L2VPN Service
UP=Up DN=Down
SB=Standby HS=Hot Standby
m=manually selected
Group
-----
Description
Displays L2VPN VFI information.
AD=Admin Down
RV=Recovering
Encapsulation
-------------
vpls-80(VFI)
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show l2vpn service vfi
Prio=Priority
IA=Inactive
NH=No Hardware
Prio St XC St
---- -- -----
0 DN DN
1269