Cisco Nexus 7000 Series Command Reference Manual page 385

Show Commands
This example shows how to display the traffic engineering LSP IPV4 detailed information:
switch# show mpls switching traffic-eng lsp ipv4 detail
IPv4 TE LSP
In-Label
Out-Label stack
Source address
Destination address
Tunnel ID
Extended tunnel id
Tunnel Instance
Out interface
Next hop
FRR status
Input traffic statistics
Output statistics per label
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
: 18
: 18
: 10.1.1.1
: 10.1.1.4
: 101
: 10.1.1.1
: 27
: Eth2/27
: 27.28.0.2
: Protected
: 0 packets, 0 bytes
: label 18, 0 bytes, 0 packets
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls switching traffic-eng lsp ipv4
1307