Cisco Nexus 7000 Series Command Reference Manual page 62

class
class
To specify the class name of the policy that you want to create or change, use the class command. To
return to the default setting, use the no form of this command.
Syntax Description
type
qos
class-map-name
class-default
Defaults None
Command Modes Class-map configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to specify the class name of the policy that you want to create or change:
switch# configure terminal
switch(config)# policy-map type qos policy1
switch(config-pmap-qos)# class class2
switch(config-pmap-c-qos)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
124
class [type qos] {class-map-name | class-default}
no class [type qos] {class-map-name | class-default}
(Optional) Specifies the type of class.
(Optional) Specifies the match on a QoS class.
Name of the class to configure or modify the policy. The maximum size is
40 alphanumeric characters.
Specifies a predefined class to which traffic is directed if that traffic does
not match any of the match criteria in the configured class maps.
Modification
This command was introduced.
Description
Protocol (LDP).
C Commands
OL-24994-01