Cisco Nexus 7000 Series Command Reference Manual page 67

C Commands
cost-limit
To configure the cost-limit for an individual TE tunnel, use the cost-limit command.
Syntax Description max-cost
Command Modes TE Interface Configuration (config-if)
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Examples The following example shows how to configure cost limit for an individual TE tunnel:
switch# configure terminal
switch(config)# interface tunnel-te
switch(config-if)# cost-limit
switch(config-if)#
OL-24994-01
cost-limit max-cost
The maximum permitted cost for the tunnel path.
Modification
This command was introduced.
number
4
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
cost-limit
129