Cisco Nexus 7000 Series Command Reference Manual page 299

S Commands
system bridge-domain
To identify the IDs that are available for bridge-domain configurations, use the system bridge-domain
command.
Syntax Description id
-id
Defaults None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines The optional list of ID ranges are separated by commas (,). Do not type the ellipses (...).
This command requires the MPLS Services license.
Examples This example shows how to identify the IDs that are available for bridge-domain configurations:
switch# configure terminal
switch(config)# system bridge-domain 10-50,100-500
switch(config)#
Related Commands Command
bridge-domain
OL-24994-01
system-bridge domain id [-id |-id,..., id-id]
System bridge domain ID. The range is from 2 to 967.
Last ID in a range of contiguous IDs. The hyphen (-) is required.
Modification
This command was introduced.
Description
Enters bridge-domain configuration mode and configures a bridge domain.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
system bridge-domain
1231