Index - Cisco Nexus 7000 Series Command Reference Manual

index

index
To insert or modifiy a traffic engineering (TE) explicit path entry at a specific index, use the index
command. To restore the system to its default condition, use the no form of this command.
Syntax Description
index
command
Defaults None
Command Modes TE explicit path configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to insert or modifiy a path entry at a specific index:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# explicit-path name link5
switch(config-te-expl-path)# index 10 next-address 10.0.0.1
Explicit Path name link5:
switch(config-te-expl-path)#
Related Commands Command
mpls traffic-eng
configuration
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
176
index index command
no index index command
Index number. The range is from 1 to 65535.
Command that can be the exclude-address keyword or the next-address
keyword.
Modification
This command was introduced.
10: next-address 10.0.0.1
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
I Commands
OL-24994-01