Cisco Nexus 7000 Series Command Reference Manual page 370

show mpls static binding ipv4
show mpls static binding ipv4
To display the Multiprotocol Label Switching (MPLS) configured static IPv4 labels, use the show mpls
static binding ipv4 command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Interface configuration mode
Command Modes
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display the MPLS static IPv4 labels:
switch# config t
Enter configuration commands, one per line.
switch(config)# mpls ldp configuration
switch(config-ldp)# show mpls static binding ipv4
switch(config-ldp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1292
show mpls static binding ipv4
Modification
This command was introduced.
Description
Protocol (LDP).
End with CNTL/Z.
Show Commands
OL-24994-01