Cisco Nexus 7000 Series Command Reference Manual page 205

M Commands
mpls static binding ipv4
To configure the static binding of labels to IPv4 prefixes, use the mpls static binding ipv4 command. To
return to the default setting, use the no form of this command.
Syntax Description prefix mask
label
input
output
nexthop
explicit-null
implicit-null
Defaults
None
Command Modes LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the static binding of labels to IPv4 prefixes:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config)# mpls static binding ipv4 10.2.2.0 255.255.255.255 input 17
switch(config)#
OL-24994-01
mpls static binding ipv4 prefix mask {label | input label | output nexthop {explicit-null |
implicit-null | label}}
no mpls static binding ipv4 prefix mask {label | input label | output nexthop {explicit-null |
implicit-null | label}}
Destination prefix and mask.
Label value. The range is from 16 to 1048575492286.
Specifies the incoming local label.
Specifies the outgoing remote label.
Destination next hop.
Specifies the IETF MPLS IPv4 explicit null label.
Specifies the IETF MPLS implicit null label.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls static binding ipv4
1157