Cisco Nexus 7000 Series Command Reference Manual page 284

signalling hello graceful-restart send recovery-time
signalling hello graceful-restart send recovery-time
To configure the recovery time that is advertised in the restart-capability object in hello messages, use
the signalling hello graceful-restart send recovery-time command. To return to the default settings,
use the no form of this command.
Syntax Description
time
Defaults
120 seconds
Command Modes RSVP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the recovery time that is advertised in the hello messages:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling hello graceful-restart send recovery-time 130
switch(config-ip-rsvp)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1216
signalling hello graceful-restart send recovery-time time
no signalling hello graceful-restart send recovery-time time
Hello interval in seconds.The range is from 2000 to 300000.
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01