Cisco Nexus 7000 Series Command Reference Manual page 233

P Commands
ping mpls pseudowire
To target virtual circuit (VC) specified as an IPv4 address and VC ID, use the ping mpls pseudowire
command.
Syntax Description ipv4-address
vc-id
Defaults None
Command Modes EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command requires an MPLS license.
Examples This example shows how to target a VC specified as an IPv4 address and VC ID:
switch# ping mpls pseudowire 33.0.1.63 100
Related Commandss Command
mpls oam
OL-24994-01
ping mpls pseudowire ipv4-address vc-id
IPv4 address.
Virtual circuit ID. The range is from 1 to 4294967295.
Modification
This command was introduced.
Description
Targets a VC specified as an IPv4 address and VC ID
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
ping mpls pseudowire
1185