Graceful-Restart - Cisco Nexus 7000 Series Command Reference Manual

graceful-restart

graceful-restart
To configure the graceful restart timer, use the graceful-restart command. To return to the default setting,
use the no form of this command.
Syntax Description timers
forwarding-holding
seconds
max-recovery seconds
neighbor-liveness
seconds
Defaults
Enable
Command Modes LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines You must configure the MPLS VPN and VRFs before creating VRF-aware static labels.
This command requires the MPLS Services license.
Examples This example shows how to configure the graceful restart timer:
switch(config-ldp)# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# graceful-restart timers forwarding-holding 30
switch(config-ldp)#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
168
graceful-restart [timers {forwarding-holding seconds | max-recovery seconds |
neighbor-liveness seconds}]
no graceful-restart [timers {forwarding-holding seconds | max-recovery seconds |
neighbor-liveness seconds}]
(Optional) Specifies VPN routing.
Specifies the forwarding state holding time. The range is from 30 to 600
seconds.
Specifies the maximum recovery time. The range is from 15 to 600 seconds.
Specifies the neighbor lifetime. The range is from 5 to 300 seconds.
Modification
This command was introduced.
G Commands
OL-24994-01