Cisco Nexus 7000 Series Command Reference Manual page 292
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
signalling refresh misses
signalling refresh misses
To configure the number of refresh messages that can be missed before the Resource Reservation
Protocol (RSVP) determines that a state is to expire, use the signalling refresh misses command. To
return to the default settings, use the no form of this command.
Syntax Description
time
Defaults
4 seconds.
Command Modes
RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure the number of refresh messages that can be missed before RSVP
determines that a state is to expire:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling refresh misses 5
switch(config-ip-rsvp)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1224
signalling refresh misses refresh-missed
no signalling refresh misses refresh-missed
Hello interval in seconds.The range is from 2000 to 300000.
Modification
This command was introduced.
Description
Protocol (LDP).
S Commands
OL-24994-01
Advertisement
Table of Contents
