Affinity (Te Interface Configuration Mode) - Cisco Nexus 7000 Series Command Reference Manual

affinity (TE interface configuration mode)

affinity (TE interface configuration mode)
To configure attribute flags for links that comprise a label switched path (LSP), use the affinity
command.
Syntax Description mask
value
Defaults Value default is 0x00000000
Mask default is 0x0000ffff
Command Modes TE interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to configure attribute flags for links that comprise an LSP:
switch# configure terminal
switch(config)# interface tunnel-te 1
switch(config-if-te)# affinity 0X0101 mask 0X0303
switch(config-if-te)#
Related Commands Command
interface tunnel-te
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
110
affinity [mask value]
(Optional) Link attribute to be checked. A 32-bit decimal number. Valid
values are from 0x0 to 0xFFFFFFFF, representing 32 attributes (bits),
where the value of an attribute is 0 or 1.
Attribute values required for links carrying this tunnel. A 32-bit decimal
number. Valid values are from 0x0 to 0xFFFFFFFF, representing 32
attributes (bits), where the value of an attribute is 0 or 1.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
A Commands
OL-24994-02