Cisco Nexus 7000 Series Command Reference Manual page 249

R Commands
redistribute direct route-map
To redistribute directly connected routes using the Border Gateway Protocol (BGP), use the redistribute
direct route-map command
Syntax Description
map-tag
Defaults
None
Command Modes Address family configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to redistribute directly connected routes using BGP:
switch# configure t
switch(config)# router bgp 1.1
switch(config-router)# vrf vpn1
switch(config-router-vrf)# address-family ipv4 unicast
switch(config-router-vrf-af)# redistribute direct route-map directMap
switch(config-vrf-af)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
.
To return to the default setting, use the no form of this command.
redistribute direct route-map map-tag
no redistribute direct route-map map-tag
Map name that can be any case-sensitive, alphanumeric string up to 63
characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
redistribute direct route-map
1201